228 Gallon Outdoor Wood Stove

This model of Burnrite Outdoor Wood Stove holds 228 gallons of water and will heat approximately 4,500 to 10,000 square feet of space.  You can hook up to four buildings, all your hot water including pools, hot tubs, green houses and much more.  It has an approximate BTU output of 250,000.

Each Burnrite Outdoor Wood Furnace comes with a 20 year limited manufactures warranty, insulated 18" UL approved chimney and cap as well as a water fill cap, 100 cfm fan mounted on the front door and thermostat pre-set and wired. A large hinged back door provides for easy access to hook ups.  Each model has dual inlets and outlets and a drain. 

Each model is UL¹ listed and approved and CSA² tested.

Our outdoor furnaces are built with a material that is made to last, A-36 all certified steel.  The inside and outside are built with A-36 steel so the electrodes do not attack the metal and destroy the inside of your stove.

Each model is built with a round fire box for better heat transfer, longer burn times and minimal ash build up.  Each model has been built to circulate returned water completely through the stove before it can be returned back into the system which means consistent water temperature throughout your system.

The outside surface of the Outdoor Wood Stove is insulated with R-19 insulation keeping the outside of the stove cool and safe to the touch.

Model 228 Specifications:

• Width: 60"
• Length: 88"
• Height: 100"
• Approx. BTU's: 250,000
• Chimney Size: 8"
• Firebox Length: 48"
• Door Size: 20" x 22"
• Inlet: 2 - 1" NPT
• Outlet: 2 - 1" NPT
• Water Capacity: 228 Gal.
• Approx. Weight: 2000 Lbs.
• Approx. Sq./Ft.: 8000

¹ UL stands for Underwriters Laboratories

² CSA stands or Canadian Standards Association